Info
Info
News Article

Cracks In Perovskite Films Easily Healed, Study Finds

News

Cracks are easily healed with some compression or a little bit of heat

A new study reveals good news for the possibility of using perovskite materials in next-generation solar cells.

The study, published in the journal Acta Materialia, finds that though perovskite films tend to crack easily, those cracks are easily healed with some compression or a little bit of heat (see picture above). That bodes well, the researchers say, for the use of inexpensive perovskites to replace or complement pricy silicon in solar cell technologies.

"The efficiency of perovskite solar cells has grown very quickly and now rivals silicon in laboratory cells," said Nitin Padture, the Otis E. Randall professor in Brown's School of Engineering and director of Brown's Institute for Molecular and Nanoscale Innovation. "Everybody's chasing high efficiency, which is important, but we also need to be thinking about things like long-term durability and mechanical reliability if we're going to bring this solar cell technology to the market. That's what this research was about."

Perovskites, a broad class of crystalline materials, were first incorporated into solar cells in 2009. Those first perovskite solar cells had a power conversion efficiency of around 4 percent, but now that exceeds 25 percent - essentially the same as traditional silicon. The advantage of perovskite solar cells is that they can be made for a fraction of the cost of silicon, potentially cutting the cost of solar power installations. Perovskites can also be made into thin films that are semi-transparent and flexible, potentially clearing the way for energy-generating windows or for lightweight, flexible solar cells in tents or backpacks.

But the low-cost and ease of making perovskite solar cells comes with a cost. "In material science, things that are easy to make also tend to be easy to break," said Padture who led the study. "That's certainly true of perovskites, which are quite brittle. But here we show they're also quite easy to fix -- cracks in perovskite films can be healed by compressing them or with moderate heat."

For the study, Srinivas Yadavalli, a doctoral student working in Padture's laboratory and the first author of the paper, deposited perovskite films on plastic substrates. He then bent the substrate to put tensile (pulling apart) stress on the perovskite film while using a scanning electron microscope (SEM) to detect cracks. Once the film was cracked, the researchers then bent the substrate in the opposite direction to see if compressive stress might heal those cracks.

Sure enough, SEM imaging showed that the cracks had disappeared. To make sure the cracks were fully healed and not merely hidden, the researchers used a technique known as X-ray diffraction. By measuring the size of a material's atomic lattice, the technique can reveal whether a formerly cracked area is now able to carry a mechanical load - a surefire sign that the crack is healed. Those tests also indicated fully healed cracks.

The researchers found that heat was just as effective in healing cracks. Temperatures around 100degC - quite modest heating by material science standards - were enough to completely heal cracks in perovskite films.

Padture says that the research was aimed at better understanding the basic properties of perovskite materials, and more work needs be done to develop methods of applying this information in a commercial setting. But knowing that perovskite films are easily healed could be useful as these kinds of solar cells move toward commercialisation.

"It's good news," Padture said. "It suggests that fairly simple healing methods may help maintain performance in these kinds of solar cells."

Efficient QD Solar Cells Exploit Defects
Record Solar Outputs Help UK To Reach Longest Coal-free Period Since Pre-industrial Times
Carbon Neutral Vs Carbon Negative: What’s The Difference?
BYD Announces Compatibility Of Battery-Box Premium Series With KOSTAL
HZB Develops CIGS-Perovskite Tandem Cell
Greencoat Solar To Acquire 156MW Portfolio From BlackRock Real Assets And Lightsource Bp
Tesvolt Supplies Storage Systems For Europe’s Largest Electric Car Charging Park
Water-splitting Module: A Source Of Perpetual Energy?
3D-printed System Can Test Perovskite Solar Cells In Minutes
NREL Helps Establish Perovskite Consortium
Over 10GW Of Renewables Projects Could Be Competing In The Next CfD Round
NREL Six-Junction Cell Sets Efficiency Records
Towards Lead-free Stable Perovskite Solar Cells
Global Solar Council Engages Solar Businesses To Track Effects Of COVID-19 Emergency And Understand Possible Scenarios
Trailar Chooses Souriau For Its Mobile Solar Solutions
Perovskite Cells Pass IEC Heat And Humidity Tests
A Simple Way To Detect Tiny Imperfections
Next-gen Solar Cells Take The Heat And Maintain Efficiency
CdTe Solar Cells Are Better For The Planet Than Silicon
Schneider Electric Partners With Sustainable Ventures To Launch The Net Zero Home Programme
SMA Inverters Featuring Integrated Yield Optimization Outperform Module Optimizers
US Team Demonstrates Promising Solar Cell Compound
RES Keeps The Lights On For 600,000 Homes During Lockdown
SOLARWATT Reports Rising Demand And The Most Successful Quarter In The Company’s History

Info
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
Logo
×
Register - Step 1

You may choose to subscribe to the Smart Solar Magazine, the Smart Solar Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
 
X
Info
X
Info
{taasPodcastNotification}